|
Resources
DIY - Replace that gaitor cord with a wire
A weak point in the design of many gaitors is the cord that runs under the sole of your boot. While some models have a beefy (and heavy) strap, some have just a nylon cord. After any amount of rough terrain, the nylon cord gets frayed and cut. As it’s on the bottom of your boot, it’s hard to notice when it’s almost cut through
Here’s an easy modification that will eliminate this hassle. Head to the hardware store, and buy 3 feet of 1/16 inch cable from the bulk spools and 4 1/16” aluminum sleeves. (Note: This size cable and sleeves are also the key gear you need to make a hanging stove.) With wire cutters and a bit of patience, you replace the cord with a looped wire. Clamp the aluminum sleeves onto the wire with pliers. Note that this is non-adjustable, so size it to the shoes you’ll use most often with the gaitors.
527 SE 43rd Ave, Portland OR 97215 © 1894 - 2012 Mazamas
Contact Us | Privacy